EX80-Series insertion electromagnetic flowmeters are designed 
for use with conductive liquids in 1 to 12” pipe. A choice of 
materials (stainless steel, brass, and PVC) allows the meter 
to adapt to a range of temperature, pressure, and corrosive 
environments.
The EX80 is highly suitable for difficult applications with changing 
viscosities and pulsating flows, such as air-driven diaphragm 
pumps. With no moving parts, these meters can be used in 
“dirty” applications where debris would foul a mechanical 
meter. Like all magmeters, when used in chemical injection 
applications, these meters should be installed upstream of the 
chemical line (or far enough downstream to allow complete 
mixing of fluids before the meter).
Designed for modularity and versatility, the EX80-Series has 
a current-sinking pulse output that can be combined with the 
appropriate transmitter or indicator for the application.  For 
analog output and display of rate and total, an FT420 can be 
used.  Blind analog output is provided by the AO55.  The PD10 
can be used to divide the pulse for pacing chemical metering 
pumps and the DL76 (data logger) is also compatible. Modules 
can be wall- or meter- mounted. If the EX80 meter is used with 
a programmable controller, the output signal can be fed direct, 
with no other conditioning required.
EX80-Series fixed depth insertion meters require special 
fittings. Factory installation in the fitting ensures correct depth 
placement in the pipe. The EX80-Series meter can be ordered 
in a full power model when a source of electricity is available, 
or in a low power model that can run on an external battery 
with solar panel.
Reverse flow output and immersibility are optional.